A high-temperature electric valve operates as follows: the control system issues a command; the electric actuator is energized to activate the motor; the motor then employs a gear train to reduce speed and increase torque, thereby driving the valve stem and ball to rotate by 90° or less. This rotation alters the relative position between the ball's through-hole and the pipeline, enabling the valve to open, close, or modulate its flow capacity.

Brief Introduction of  Pneumatic Stainless Steel Lined Fluorine Ball Valve

The  pneumatic stainless steel lined fluorine ball valve adopts an integrated structure of ball and valve stem. It resists strong corrosion from media and can work at temperatures ranging from -85 to 150℃, making it an ideal control device for corrosive media.

German standard corrugated pipe stop valve WJ41H/W is suitable for nominal pressure PN1.6-10.0MPa and working temperature - 20 ℃ - 425 ℃. The service life of the national standard bellows globe valve mostly depends on its core component - bellows. Bellows globe valve is a new type of bellows valve. Because the valve is designed with double seals, its sealing performance is more reliable than that of ordinary globe valves. The bellows with advanced technology in the world is used as the main technical component, which greatly improves the fatigue resistance and service life of the bellows stop valve. The use of the national standard bellows stop valve is applicable to the pipeline of the petroleum, chemical, pharmaceutical, chemical fertilizer, electric power industry and other working conditions, and is applicable to the heat transfer oil, toxic, flammable, highly permeable, polluting environment, radioactive fluid medium pipeline as the cut-off valve, and can also be used for regulation, It is the product to create a leak free factory.

ASTM A213 Seamless Pipe, Pipe O.D is 19.05 mm and Pipe Wall thickness is 16BWG, Plain End, 9100mm pipe length and material grade ASTM A213 T5

API 5L X 46 PSL1 Seamless Pipe,Size 4Inch and Wall Thickness SCH 80,Beveled End, Material API 5L GR.B, Black Anti-Rust Coated , AISI B36.10 Standard, Length 6 meter

ASTM A182 F316 Welding Neck Flange, Size 6inch, Pressure Class 150, Wall Thickness SCH 80, Material Stainless Steel ASTM A182F316, End Connect Raised Face Flange, Standard ANSI B16.5

CH40 Welding Neck Flange, Size 2inch, Pressure Class 900, Wall Thickness SCH 40, Material Carbon Steel ASTM A105, End Connect Raise Face, Standard ANSI B16.5

ASTM A182 F53 Duplex Stainless Steel Welding Neck Flange, Size 16 inch, Pressure Class 150, Wall Thickness SCH 60, Material Duplex Stainless Steel ASTM A182 F53, End Connect Raise Face, Standard ANSI B16.5

ASTM A182 F11 Welding Neck Flange, Size 3, Pressure CL150, Wall Thickness SCH60, Material Carbon Steel ASTM A82 F11, End Connect Raise Face, Standard ANSI B16.5

Stainless Steel Welding Neck Flange, Size 4 inch, Pressure Class 300, Wall Thickness SCH 60, Material Stainless Steel ASTM A182 F316L, End Connect Raised Face Flange, Standard ANSI B16.5

Nuts. Fluoropolymer

DIN933 Fully Stud with Nuts and Gasket, Stud material is Stainless steel SS304,Stud Size 1 1/2Inch and Length 180mm

ASTM A194 B8M Heavy Nuts, Size 2In, Thread Material A193 B8M With Length 165mm, DIN930 Standard

SS304 Cold Rolled Steel Coil, Size 0.2~3mm Thk and Width 1000-1500mm, Coild weight 4-14Ton

Type: SS304 Cold Rolled Steel Coil 

SS316 Stainless Steel Coil, 0.6mm Thickness, Standard A240,Cold Rolled

Titanium Steel Coil, Size 3mm x 1200 Width x 5 Tons, Material ASTM B265 Gr.2

Industry Seamless Elbow, SR, 45 Degree, Elbow material carbon steel ASTM A234 WPB, Size 16 Inch, Wall thickness Sch 40, ANSI B16.9

ASTM A234 WPB Tee, Tee size 10 Inch and wall thickness SCH40, Standard ANSI B16.9

45Degree Bend, material ASTM A335P11, R=3D, Bend Size 14Inch, Wall Thickness SCH 40, Butt Weld End, ANSI B16.49

ASTM A403 WP316L Seamless Pipe, Butt Weld End, Seamless Cap, Size 12Inch, wall Thickness SCH 40,Mateiral Stainless Steel ASTM A403 WP 316L, Standard ANSI B16.9

Galvanize Coating Tee, Forged Steel Tee, Size 1 1/2 Inch, Socket Weld End, Material carbon steel ASTM A350 LF2, Pressure CL3000,Standard ANSI B16.11

Con.Swage, Forged Steel ASTM A105, Size 1Inch X 1 1/4 Inch, Wall Thickness SCH40, Thread End, material ASTM A106 Gr.B , Standard MS-SP97